Username:  Password:  
  / Register / Forgotten Login
Cleaners And Polishes
Heavy Plant
Marine and Diving
Pool and Spas
  • Testimonials
  • Video
  • Spray Seal HS
Bill Wyatt - W.S Wyatt & Son

Innotec's Products - I know that they are predominantly designed for the automotive industry and I work in construction. But, as you are aware, I have used them for a varying range of jobs throughout my working week.
Your Flagship product 'Adheseal' is quite simply brilliant. I have tried other products that can
allegedly work under water, these shall remain nameless, (they know who they are!). But after Jim, so ably demonstrated that, 'Adheseal' actually does work!! Gone are the days when I have to assess a leaking gutter for example, only to return at a later date to complete a repair. This can now be done at the time of my inspection, rain or shine.
'Sprayseal' also, in my opinion, is a market leader. I describe it as 'Adheseal's' little brother, as although it is thinner, it is of a similar if not the same compound, thus making it able to be sprayed, meaning awkward situations that are unable to be attended to without 'major surgery' can be dealt with, with a minimum of fuss.
As you know we also install a large amount of plastic fascias and soffits, 'Easy Clean' is simply the best cleaner we have come across. We have a spray bottle in both of our vehicles at all times and I have been pressurised into leaving a few bottles at clients' houses because they are so impressed at the state that we have left their other plastics in, and they wish to maintain it.The list of Innotec products that we have used goes on and on, and every one of them is superb and leaves theirs competitors in the shade.
I will continue to use Innotec products for the foreseeable future, as I firmly believe that they
cannot be bettered, unless the boys in white coats manage to improve upon perfection!! Thank you so much for introducing them to me, I think Innotec should use the slogan, "Innotec, we make the difficult jobs easy" becasue you do.

Spray Seal HS

Do you ever need a professional spray-on sealer for seams? Spray Seal is regarded as the best product of its type by our customers for the repairing of factory original seams.
Also this sprayable sealant is often being applied as stone chip protection in e.g. wheel arches or as sound and vibration dampening on large plates, such as the rear side or the roof of the truck cabin. Spray Seal is known for repairing these original structures, but also for solving the problems with resonance afterwards.
Surface preparation:
The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol.
Method of use:
Spray at 4 to 5 bar using the specially designed Sealer Applicator.
Features and Benefits:
-Spray-Seal is an aromatic-free
-Sprayable bodywork sealant,
-Imitate the factory original seams and structures on sheet metal parts for many makes of vehicle.
-Spray-Seal can be worked extremely finely without over-spray or spider-webbing.
-Spray-Seal can be sprayed over wet-on-wet after 30 minutes.
-Spray-Seal is isocyanate-free and retains its elasticity at all times.
-Does not shrink and thanks to its excellent adhesion it protects the surface well.
-Spray-Seal comes in two variants: Spray Seal HS-m and Spray-Seal LS-m.
-Very fast skin formation and drying.
-Can be worked finely and is simple to apply.
-Excellent rust prevention under sealed coating.
-Impact and chip resistant.
-Available in 6 factory original colours.
-Spray-Seal has an extremely long storage life in the Sealer Applicator.
-Spray seal comes in two variations.
-Spray-Seal LS-m is ideal for large surfaces thanks to its sound insulating properties.
-Spray-Seal LS-m is ideal for floor panels, wheel arches and sills.
Spray-Seal HS-m due to its high constancy is ideal for very coarsely sprayed structures requiring a very thick layer of product. The product can also be used with a sealant spray, so that precision seams, such as door seams can be applied perfectly, and the product can also be applied with a nylon brush.
The handy 290 ml cartridges make Spray-Seal very economical and easy to use. The wide range of settings available with the special Sealer Applicator makes it possible to imitate just about any structure. The Seal Applicator is made in such a way that an open sealant cartridge will keep in the pistol for a very long time. This also keeps cleaning to a minimum.
When brushing the sealant it is recommended to use the Brush for the best results.
Spray Seal HS
  << 14 of 16 >>  
You need to be logged in to order this product.
BASKET: Total Items: 0
Total Price: £0.00 ex Vat