Username:  Password:  
  / Register / Forgotten Login
Aquatics
Automotive
Caravans
Cleaners And Polishes
Construction
Engineering
Heavy Plant
Industrial
Marine and Diving
Motorcycles
Pool and Spas
Trucks
  • Testimonials
  • Quick Bond Activator

Quick Bond Activator

Quick Bond and Quick Bond Activator are unique products especially designed for the quick repair and gluing of metals and almost every type of modern synthetic. Quick Bond is a special gel, which stays in place because it does not run. This means no drips to damage underlying parts and no more gluing of fingers. 
 
Surface preparation:
The surface must be clean, dry and free of grease. Roughen up or sand the surface. Clean metal surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer New Formula.
 
Method of use:
When gluing: Give one part a thin layer of Quick Bond, spray the other part with a thin layer of Quick Bond Activator, and join the parts together. Allow a few minutes for Quick Bond to dry.
 
When repairing: After 30 seconds, apply a thin layer of Quick Bond Activator over the element repaired with Quick Bond. It will take only a few seconds to harden.
 
Properties: 
- Quick drying. 
- Colourless. 
- Excellent adhesion. 
- Easy to use, no mixing needed. 
- Does not contain solvents. 
- Tixotropic. 
- Cures at room temperature. 
Quick Bond Activator
  << 11 of 16 >>  
You need to be logged in to order this product.
BASKET: Total Items: 0
Total Price: £0.00 ex Vat