Username:  Password:  
  / Register / Forgotten Login
Aquatics
Automotive
Caravans
Cleaners And Polishes
Construction
Engineering
Heavy Plant
Industrial
Marine and Diving
Motorcycles
Pool and Spas
Trucks
  • Testimonials
  • Video
  • Quick Bond

Quick Bond

Need a quick glue, tough as nails?

Quick Bond and Quick Bond Activator are unique products especially designed for the quick repair and gluing of metals and almost every type of modern synthetic. Quick Bond is a special gel, which stays in place because it does not run. This means no drips to damage underlying parts and no more gluing of fingers.

The extremely long open time ensures that parts can be perfectly lined up when gluing. When the time comes to form a bond, Quick Bond Activator is applied to start an immediate reaction.

Quick Bond adheres perfectly to plastics and painted or bare metal parts. The product cures in seconds once the Activator is sprayed on, and can be manipulated or stressed immediately.

It occurs frequently that the plastic supports, eyes, clips, bolts or threaded holes of fairings, mirrors, panniers and mudguards of motorcycles break off. These can be perfectly glued with Quick Bond. Glues that are heavily loaded, can be strengthened with Repaplast and Quick Bond can be used as fixation

Quick Bond's transparency means that no fracture line can be seen, and the product is ideal for gluing plastic rear lights, indicators, flashing lights, Perspex panels, etc. It can also be used to fill holes in headlamp glass. In jobs involving electronics Quick Bond can be used to fix wires in a simple but effective manner.

As part of the Repaplast Scratch Repair System this product can be used to fill scratches in textured plastic, before finishing with Repaplast Structure Coat and Repaplast Colour Finish.

Packaged in a handy 10g tube and cannula, Quick Bond is easy to use and administer. Thanks to the unique easy-close cap the tube can be opened time and again without a problem, and has a longer storage life. Quick Bond Activator comes in a handy 150ml aerosol can.
 
Surface preparation:
The surface must be clean, dry and free of grease. Roughen up or sand the surface. Clean metal surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer New Formula.
 
Method of use:
When gluing: Give one part a thin layer of Quick Bond, spray the other part with a thin layer of Quick Bond Activator, and join the parts together. Allow a few minutes for Quick Bond to dry.
 
When repairing: Apply Quick Bond straight from the tube to the repair area. Smooth with a filling knife or spatula. Wait 30 seconds and apply a thin layer of Quick Bond Activator over the element repaired with Quick Bond. It will take only a few seconds to harden.
 
Properties:
- Quick drying. 
- Colourless. 
- Excellent adhesion. 
- Easy to use, no mixing needed. 
- Does not contain solvents. 
- Tixotropic. 
- Cures at room temperature. 
Quick Bond
  << 10 of 16 >>  
You need to be logged in to order this product.
BASKET: Total Items: 0
Total Price: £0.00 ex Vat