 |
Alu Scratch Repair System
The Innotec Alu Scratch Repair System is an advanced set of unique products specially developed to repair surface damage to metal / aluminium look parts or objects in a quick and professional manner. Perfect for alloy wheel scuffs!
Almost all “cosmetic” damages to metal or aluminium look coatings can be repaired with the Innotec Alu Scratch Repair System. The system is highly suitable for repairing curb scratches or other surface damages on light metal rims. Besides, it is also perfect for optimum repairing of almost all damages to roof rails, decorative strips, stair railings, balustrades, etc.
The Alu Scratch Repair System provides professional users with a set of tools allowing them to perform an optimum repair in no time. In many cases, repairing of light metal rims can even be done without disassembling, and thus without requiring a special workplace or car ramp.
The Alu Scratch Repair System comes complete in a durable case, to keep everything you need to hand during the repair.
Properties:
- Unique system for cosmetic repairing of metal or aluminium look parts.
- Allows to perform a professional repair of light metal rims within 30 min.
- Conventional repair or replacement of light metal rims is no longer necessary.
- Small material investment.
- Method of repairing accepted and recommended by insurers.
|
 |
|
|
|
 |
Alu Powder
Alu Powder is part of the Innotec Scratch Repair System and is a specially developed aluminium pigment that should be added to the Alu Scratch Repair (art.no. 01.0637). By adding this product the repair resin will obtain the required hardness, so that it will be perfectly sandable once it is dry. Alu Powder is not only meant to reinforce, but also to colour the repair resin giving it the basic colour for repairing.
Properties:
- Aluminium pigment to be added to the Alu Scratch Repair.
- Reinforcing the repair resin that will be perfectly sandable as a result.
- Colouring the repair resin. |
|
|
|
|
 |
Alu Scratch Repair Activator
| Alu Scratch Repair Activator is part of the Innotec Alu Scratch Repair System and is only used for accelerating the curing of Alu Scratch Repair. |
|
|
|
|
 |
Alu Scratch Repair Tube
Alu Scratch Repair is part of the Innotec Alu Scratch Repair System and is a professional filler for repairing scratches on aluminium surfaces.
Alu Scratch Repair should always be used in combination with Alu Powder. Thanks to this combination the almost weightless filling mass will have the ideal hardness so that it will be perfectly sandable afterwards.
Alu Scratch Repair shows an excellent adhesion to almost all aluminium and metal surfaces (whether lacquered or not). After being applied, the Alu Scratch Repair should be activated with Alu Scratch Repair Activator in order to accelerate its curing. As a result, the product will be ready for further treatment or exposure after 2 minutes already.
Both in automotive and industry, it happens regularly that aluminium or metal look parts or objects show cosmetic damage or scratches, e.g. light metal rims, roof rails, aluminium frames, stair railings, balustrades, etc. Almost all these damages can be repaired with the Innotec Alu Scratch Repair System.
Packaged in a handy 10g tube with cannula, Alu Scratch Repair is easy to use and dose. Thanks to the unique easy-close cap the tube can be opened time and again without a problem, and has a longer storage life.
Properties:
- Excellent adhesion.
- Perfectly sandable.
- Easy to use.
- Temperature resistance up to 80°C.
- Can be sprayed/painted over with almost any priming paint system.
- Undercoat of Innotec Spotprimer advisable.
- Finish with Innotec Alu Finish or Metal Finish.
- Contains no solvents.
- Almost weightless.
|
|
|
|
|
 |
Masking Plate
The Innotec Masking Plate is part of the Innotec Alu Scratch Repair System and is a handy tool that can be used when spray-painting a wheel. The specially designed plate can be put between rim and tire to protect the tire quickly and efficiently against spraying mist.
Properties:
- Quick protection of tire and environment against spraying mist.
- Very good resistance to solvents.
- Reusable.
|
|
|
|
|
 |
Masking Tape
Masking Tape is a high-quality cover tape strengthened with a PET film and specially developed to protect rubber and parts of vehicles or objects that need to be covered.
Perforation between the parts makes that the tape can be perfectly applied in roundings or under rubbers. Masking Tape has a glue layer with a good resistance to heat, moisture and solvents and is therefore perfectly suited for covering purposes during painting, even in the spray booth. Masking Tape resists to almost any modern paint system.
Masking Tape is an important part of the Innotec Alu Scratch Repair System (art.no. 10.600). The tape can be pushed easily between the tire and the rim, so that the tire is protected against mechanical damage, spraying mist and being soiled by the Scratch Repair.
Properties:
- Very durable cover tape with a non adhesive, hard plastic margin that can be pushed easily under the rubber strips of a car window.
- Protects the rubber against spraying mist, without causing paint lines.
- Perfectly usable in angles and roundings thanks to perforation.
- Excellent resistance to high temperatures (110°C).
- Good resistance to moisture and solvents.
- Margin with 10 mm PET film.
- Leaves no annoying glue residues after removal.
- Perfect adhesion to windows, paintwork, rubber, plastics and numerous other surfaces. |
|
|
|
|
 |
Mixing Cups (10)
The Cups are part of the Innotec Stone Chip Repair System and the Innotec Scratch Repair System.
In the Stone Chip Repair System the Cups are used to add the correct amount of Colour to the mixing beaker during the repair. This means that the Stone Chip Colour bottle need not stay open too long, thereby preventing the quality of the product from deteriorating.
In the Alu Scratch Repair System the Cups are used to mix the correct amount of product (Alu Scratch Repair + Alu Powder) before repair, thus enabling us to work cleanly during repair.
|
|
|
|
|